Search Results

The thermal degradation of ion E/R (ion exchange resin) has been investigated in the pure water generation power plants, but not in electric power generation in Fuel Cell Vehicle (FC-V). Electric power generation fuel cell uses its coolant water of 50wt% ethylene glycol (EG). When EG degraded in the heated condition, ions elute in the coolant. This ion elution reduces the ion E/R performance through reduction of its capacity. This paper describes the effect of thermal degradation of ion E/R in FC-V.

The consideration of vehicle soiling in the development process becomes ever more important because of the increasing customer demands on current vehicles and the increased use of camera and sensor systems due to autonomous driving. In the process of self-soiling, a soil-water mixture is whirled up by the rotation of the car’s own wheels and deposits on the vehicle surface. The validation of the soiling characteristics in vehicle development usually takes place in an experimental manner, but is increasingly supported by numerical simulations. The droplet field at the tyre has been investigated several times in the past. However, there are no published information regarding the physical background of the droplet formation process and the absolute droplet sizes considering the position at the tyre and the behaviour at different velocities.

The kinematic response of vehicle occupants involved in tractor-to-passenger vehicle sideswipes was examined through a series of 13 crash tests. Each test vehicle and its occupants were instrumented with accelerometer arrays to measure and quantify the impact severity at various inter-vehicular angles and impact velocities. The passenger vehicle was occupied by a volunteer test subject in the driver and right-front passenger positions. The impact angle was varied between 3° and 11° to produce a sideswipe collision between the front bumper, steered wheel, and side components of the tractor and the side panels of the struck vehicle. The passenger vehicles were struck at different locations along their longitudinal axis at impact velocities between 3 mph and 11.5 mph. Accelerations were measured at the lumbar, cervicothoracic, and head regions of the driver and right-front passenger of the struck vehicle and the tractor driver.

In vehicle NVH development, vibroacoustic simulations with Finite Element (FE) models are a common technique. The computational costs for these calculations are steadily rising due to more detailed modelling and higher frequency ranges. At the same time, the need for multiple evaluations of the same model with different input parameters, e.g., for uncertainty quantification, optimization, or robustness investigations, is also increasing. Therefore, it is crucial to reduce the computational costs in these cases. A common technique is to use surrogate models that replace the computationally intensive FE model to perform repeated evaluations. Several different methods in this area are well established, but with the continuous advancements in the field of machine learning, interesting new methods like the Gaussian Process (GP) regression arises as a promising approach.

As the carbon neutrality to reduce greenhouse gas emissions has become a global movement, the development of power sources using carbon-free fuels is an essential task for the industry. Accordingly, many companies in various fields that need carbon reduction are striving to develop power sources and build energy value chains using carbon-free or carbon-neutral fuels such as hydrogen and E-fuel. Ammonia, which is also a carbon-free fuel, stands as an efficient energy vector delivering high energy density and flexibility in transportation and storage, capable of mitigating hydrogen’s key drawbacks. However, difficulty of controlling combustion of ammonia due to its fuel characteristics limited the development of internal combustion engines using ammonia to the basic research stage in the limited operating conditions. Hyundai Motor Company presents the development of ammonia fueled 4-cylinder SI engine using direct injection strategy, designed based on 2.5L LPG T-DI engine.

To properly compare and contrast the environmental performance of one vehicle technology against another, it is necessary to consider their production, operation, and end-of-life fates. Since 1995, Argonne’s GREET® life cycle analysis model (Greenhouse gases, Regulated Emissions, and Energy use in Technologies) has been annually updated to model and refine the latest developments in fuels and materials production, as well as vehicle operational and composition characteristics. Updated cradle-to-grave life cycle analysis results from the model’s latest release are described for a wide variety of fuel and powertrain options for U.S. light-duty and medium/heavy-duty vehicles. Light-duty vehicles include a passenger car, sports utility vehicle (SUV), and pick-up truck, while medium/heavy-duty vehicles include a Class 6 pickup-and-delivery truck, Class 8 day-cab (regional) truck, and Class 8 sleeper-cab (long-haul) truck.

Lubrication systems play a major role not only in the durability of modern IC engines but also in performance and emissions. The design of the lubrication system influences the brake thermal efficiency of the engine. Also, efficient lubrication reduces the engine's CO2 emissions significantly. Thus, it is critical for an IC engine to have a well-designed lubrication system that performs efficiently at all engine operating conditions. The conventional lubrication system has a fixed-displacement oil pump that can cater to a particular speed range. However, a fully variable displacement oil pump can cater to a wide range of speeds, thereby enhancing the engine fuel efficiency as the oil flow rates can be controlled precisely based on the engine speed and load conditions. This paper primarily discusses the optimization of a lubrication system with a Variable Displacement Oil Pump (VDOP) and a map-controlled Piston Cooling Jet (PCJ) for a passenger car diesel engine.

Churning loss is an important energy loss term for rolling bearings at high-speed condition. However, it is quite challenging to accurately calculate the churning loss. A CFD study based on unsteady Reynolds-Averaged-Navier-Stokes that resolves the gas-liquid interface was performed to examine the unsteady multiphase flow in a roller/ball bearing. In this study, the rotating motion of the cage, races, rollers/balls about the shaft as well as self-rotation of rollers/balls about their own axis were accounted to accurately predict the oil distribution in various parts of the bearings. A novel meshing strategy is presented to resolve thin gaps between the roller/balls and the races/cage while preserving the shape of balls/rollers, races and cage. Five rotational speeds of the shaft have been examined for roller bearing and ball bearing respectively. Additionally, effect of clearance between roller/balls and races is investigated.

Internal combustion engine (IC engine) vehicles are commonly used for transportation due to their versatility. Due to this, efficiency in design process of IC engines is critical for the industry. To assess performance capabilities of an IC engine, thermal predictions are of utmost consequence. This study describes a computational method based on unsteady Reynolds-averaged Navier–Stokes equations that resolves the gas–liquid interface to examine the unsteady single phase/multiphase flow and heat transfer in a 4-cylinder Inline (i-4) engine. The study considers all important parts of the engine i.e., pistons, cylinder liners, head, block etc. The study highlights the ease of capturing complex and intricate flow paths with a robust mesh generation tool in combination with a robust high-fidelity interface capturing VOF (Volume-of-Fluid) scheme to resolve the gas-liquid interfaces.

Ensuring spray robustness of gasoline direct injection (GDI) is essential to comply with stringent future emission regulations for hybrid and internal combustion engine vehicles. This study presents experimental and numerical assessments of spray for lateral-mounted GDI sprays with two different plume arrangements to analyze spray collapse characteristics, which can significantly deteriorate the atomization performance of fuel sprays. Novel spray characterization methods are applied to analyze complex spray collapse behaviors using diffusive back-illuminated extinction imaging (DBIEI) and 3D computed tomographic (CT) image reconstruction. A series of computational fluid dynamics (CFD) simulations are performed to analyze the detailed spray characteristics besides experimental characterization. Spatio-temporal plume dynamics of conventional triangle-pattern spray are evaluated and compared to a plume pattern with an inversed T pattern that has more open space between plumes.

Due to the recent progress in electrification, lithium-ion batteries have been widely used for electric and hybrid vehicles. Lithium-ion batteries exhibit high energy density and high-power density which are critical for vehicle development with high driving range enhanced performance. However, high battery temperature can negatively impact the battery life, performance, and energy delivery. In this paper, we developed and applied an analytical algorithm to estimate battery life-based vehicle level testing. A set of vehicle level tests were selected to represent customer duty cycles. Thermal degradation models are applied to estimate battery capacity loss during driving and park conditions. Due to the sensitivity of Lithium-Ion batteries to heat, the effect of high ambient temperatures throughout the year is considered as well. The analysis provides an estimate of the capacity loss due to calendar and cyclic effects throughout the battery life.

This study focuses on evaluation of various fuels within a conventional gasoline internal combustion engine (ICE) vehicle and the implementation of advanced emissions reduction technology. It shows the robustness of the implemented technology packages for achieving ultra-low tailpipe emissions to different market fuels and demonstrates the potential of future GHG neutral powertrains enabled by drop-in lower carbon fuels (LCF). An ultra-low emission (ULE) sedan vehicle was set up using state-of-the-art engine technology, with advanced vehicle control and exhaust gas aftertreatment system including a prototype rapid catalyst heating (RCH) unit. Currently regulated criteria pollutant emission species were measured at both engine-out and tailpipe locations. Vehicle was run on three different drive cycles at the chassis dynamometer: two standard cycles (WLTC and TfL) at 20°C, and a real driving emission (RDE) cycle at -7°C.

As a novel ignition technology, pre-chamber ignition can enhance ignition energy, promote flame propagation, and augment turbulence. However, this technology undoubtedly faces challenges, particularly in the context of emission regulations. Of this study, the transient characteristics of combustion and emissions in a hybrid electric vehicle (HEV) gasoline engine with active pre-chamber ignition (PCI) under the first combustion cycle of quick start are focused. The results demonstrate that the PCI engine is available on the first cycle for lean combustion, such as lambda 1.6 to 2.0, and exhibit particle number (PN) below 7×107 N/mL at the first cycle. These particles are predominantly composed of nucleation mode (NM, <50 nm) particles, with minimal accumulation mode (AM, >50 nm) particles.

With the rapid development of electric vehicles (EVs), lithium-ion batteries (LIBs) with high energy and power density have been widely applied as the power producer of EVs. However, the range of EVs has been criticized. To meet consumer demand for high power and long driving distances, the energy and power density of LIBs are getting higher and higher. However, LIBs with higher energy density are more prone to catastrophic thermal runaway (TR). In recent years, EV accidents due to TR of LIBs have been frequently reported, which makes consumers lose confidence in EVs. To solve the problem, we must understand the mechanism of LIBs TR, thereby reducing the likelihood of TR in EVs. However, the induction mechanism of LIB TR induced by mechanical abuse is sophisticated. This paper focuses on recent advances in the study of thermal TR characteristics of batteries caused by mechanical abuse, including bending, collisions, and penetration.

Designing for fatigue performance requires extensive knowledge of material properties, component geometry and dynamic loading conditions. These topics are addressed in an ongoing cohesive research program on fatigue behavior of magnesium die castings. The current phase of the program includes effects of alloy type, mean stress level, surface condition, and level of tensile properties. The results, presented as S-N curves and Goodman diagrams, show a significant difference in the fatigue life between AZ91D and the AM alloys. Fatigue behavior of AM60B was strongly dependent on the mean stress level, but was not significantly influenced by a minor difference in casting quality. The fatigue behavior of AM50A was not noticeably changed by the addition of vibratory polishing.

Efficiency of Driveshafts have not been analyzed in great detail in the past due to their relatively high efficiency. However, it is possible to obtain about a 0.1 percent increase in fuel economy by decreasing driveshaft torque losses by about 20 percent, owing to the combination mode fuel calculation. In order to improve fuel economy it is necessary to increase the efficiency of the constant velocity universal joint (C.V.J.) used for driveshafts. Additionally, propeller shafts with improved heat characteristics are required. It is for these reasons that this project is conducted. In this paper, the motion of two typical joint used for front-engine, front-drive passenger cars is analyzed geometrically and efficiency formulas are derived. One of the joints is a Rzeppa joint, used on the wheel side of the driveshaft and the other is a tripot joint, used on the differential side. These formulas are then verified by experiment.

This paper describes an experimental and epidemiological investigation of the potential application of a specific rollover occupant protection system, consisting of a rollover protective structure and occupant restraint (collectively referred to hereafter as ROPS), to all-terrain vehicles (ATVs). The ROPS investigated in this paper was proposed by Dahle [1987] as a means to improve the safety of ATV operation. Crash tests were performed with an unhelmeted instrumented dummy on 4-wheel ATVs equipped with the prototype Dahle ROPS (hereafter referred to as D-ROPS); the test results established that the D-ROPS design exhibited the potential for serious injury or death in lateral rollover, rearward pitchover, collision, and oblique frontal impact accident scenarios. Review of ATV-associated 1986 fatality reports from the U.S.

Volvo has developed the first production emission control system to fully utilize a three-way catalyst. Called the “Volvo Lambda-sond system”, it is applied to the 4-cylinder in-line B21 engine, and employs three essential new components - an exhaust gas composition sensor, an additional feed-back loop to the continuous fuel injection system, and the catalyst. Outstanding certification results were achieved, especially for NOx, combined with good driveability, power output, and fuel economy. The development and performance of the system, and the test procedures used, are described in detail, and its future potential and limitations are discussed.

The development of a modern transportation product requires that the safety of the product be considered at every stage of its life, from initial design to ultimate product disposal. Virtually all of the decisions that can positively effect product safety are made during the product design stage with most of the critical decisions being made early in the process. As a result, early incorporation of system safety into the design process has been shown repeatedly to result in safer products. Incorporation of formal system safety programs into ground transportation vehicle design programs is comparatively recent. Historically, in both the automotive and the heavy goods vehicle industry, product safety has been provided through consistent over design of evolutionary system elements to ensure correct functioning under repeated exposure to worst case stresses.

The deionized water/ethylene glycol coolant used in the Ford Focus Fuel Cell Vehicle (FCV) requires very low conductivity (< 5 μS/cm) to avoid current leakage and short circuiting, presenting a unique water chemistry issue. The coolant's initially low conductivity increases as: 1) ions are released from system materials through leaching, degradation and/or corrosion, and 2) organic acids are produced by ethylene glycol degradation. Estimating the leaching potential of these ions is necessary for design and operation of fuel cell vehicles. An on-board mixed-bed, ion exchange resin filter is used to maintain low conductivity by removing leached or produced ions. Various candidate materials were evaluated for leaching potential by exposing them to coolant at the design operating temperature for several months and periodically analyzing the coolant for ions.